LizardSkin SD-Sound Control

LizardSkin SD is a sound dampening or sound damping coating for structural and mechanical noise generated through substrates and surfaces. Sound has two major ways of traveling - one through substrates and one via airborne movement. To decrease sound prior to airborne transmission it is very important to "kill" or dampen the noise vibration prior to its release to the airborne state. LizardSkin SD has special materials, which are encapsulated in a high-grade acrylic based binder that provides damping across the various frequency ranges. In fact, LizardSkin SD was tailored to control this transmission, turning the energy into low-grade heat. This translation offers an efficient means to "killing sound" through the substrate or surface.

LizardSkin SD offers a very cost effective solution to sound damping problems in a flexible monolithic coating format. Our unique chemistry and well-proven Dispersion 2T technology gives the best in sound damping abilities in an easily applied spray, brush or roll format. LizardSkin SD can also be applied quickly without cutting or taping bulky type materials and having to glue and pin to surfaces. Its direct adhesion to the surface with its high-grade resin system provides "no worry" attachment for years to come.

LizardSkin SD Sound Dampening can be applied direct to aluminum, stainless, brass, fiberglass, etc without the need for a primer. We highly recommend a sealer primer over bare steel. It can be applied via our Super Pro Spray Gun, conventional brush, or roller with ease. This coating is specially designed to be applied to a thickness of 40 mils (1.0 mm) in single applications. Typical substrates apply two coats for the most cost effective sound damping characteristics, however more coats may be applied without any upper limitations. LizardSkin SD is a no VOC product and completely solvent free as it is water based. Cleanup is simple with soap and water.

The coating has a low flame and smoke spread and is considered CLASS A fire rated. The materials and resin systems are all complimentary with LizardSkin Ceramic Insulation and are used as common practice together to give the ultimate in sound and thermal performance for vehicles.

LizardSkin SD is an excellent lightweight material that can be applied to most any other surface to dramatically reduce road structural noise. This coating can be applied to the interior or exterior of a vehicle with ease damping the noise before it is released into the car, truck, bus, etc. Since it remains flexible when the coating dries, it will remain attached to the surface without any risk of de-bonding for years to come.

Other Applications: LizardSkin SD can also be used on industrial and other equipment that produce high levels of noise due to structural translation. The coating can be applied direct to most surfaces to lower the noise prior to airborne release. When noise level safety is concerned, LizardSkin SD offers a very cost effective solution with minimal effort. Another added benefit is that the surface or equipment always remains viewable so that inspectibility never becomes an issue like it would be with conventional wraps and bulky sound insulation.

Application of LizardSkin SD : The coating can be applied with the Super Pro Spray Gun, conventional, brush or roller. Prior to application on carbon steel, there will need to be some sort of primer material as the coating is water based. For aluminum, stainless, brass, fiberglass, etc, LizardSkin SD can be applied directly. Although this coating has a paint-like consistency, it is one of the few sound damping coatings that can support its weight on vertical and overhead surfaces to 40 mils (1.0mm) wet! This is important as the coating can be applied quickly without the risk of sagging or sliding. Another great aspect is its rapid dry time. LizardSkin SD will dry to touch within one hour of application in temperatures above 70° F.

back to top